- ページ 12

計測機器 Digitek 18ASF-7000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Digitek 18ASF-7000 18 ページ。 Digital signal meter

Press "EXIT'' and press [▲/▼]to move cursor to choose "Analyze by Program'' and press "OK'' , then you can



see this interface.



Under Constellation Analyzer interface (by Program), press [▲/▼] to switch between the entire searched program.



When a frequency with signal is detected (not locked yet), the signal strength bar will be displayed on LCD.



When the signal is locked, the signal quality bar will be displayed on the LCD. Meanwhile, the LOCK LED will

light up.

3.1.3 Satellite Setting

Move cursor to "Satellite Setting'' and press "OK'' , then you can enter the "Dish Setup'' interface.



Under the Satellite list page, you can press [▲/▼] to select the satellite.



Press [F1] to add a new satellite through setting Satellite Name, Longitude Direction, Longitude Angle or Band.



Press "OK ''on Restore Factory Default to Factory Reset.



Press "OK ''on information option to get the hardware or software version.