Digitek 18ASF-7000 사용자 설명서 - 페이지 12

{카테고리_이름} Digitek 18ASF-7000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitek 18ASF-7000 18 페이지. Digital signal meter

Press "EXIT'' and press [▲/▼]to move cursor to choose "Analyze by Program'' and press "OK'' , then you can



see this interface.



Under Constellation Analyzer interface (by Program), press [▲/▼] to switch between the entire searched program.



When a frequency with signal is detected (not locked yet), the signal strength bar will be displayed on LCD.



When the signal is locked, the signal quality bar will be displayed on the LCD. Meanwhile, the LOCK LED will

light up.

3.1.3 Satellite Setting

Move cursor to "Satellite Setting'' and press "OK'' , then you can enter the "Dish Setup'' interface.



Under the Satellite list page, you can press [▲/▼] to select the satellite.



Press [F1] to add a new satellite through setting Satellite Name, Longitude Direction, Longitude Angle or Band.



Press "OK ''on Restore Factory Default to Factory Reset.



Press "OK ''on information option to get the hardware or software version.