Digitek 18ASF-7000 사용자 설명서 - 페이지 10
{카테고리_이름} Digitek 18ASF-7000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitek 18ASF-7000 18 페이지. Digital signal meter
페이지 인쇄
Chapter 3: Detailed operation guide.
When you turn on the device, you can see the main menu which consists of Satellite, Terrestrial, System Setting, Program,
Multimedia and Upgrade.
3.1 Satellite
3.1.1 Spectrum Analyzer
Move cursor to "Spectrum Analyzer'' and press "OK'' , then you can enter the "Parameter Setting'' interface.
Press [F1] to switch SPAN of spectrum frequency, FULL as default, the smaller span will show clearer signal status
of frequencies.
Press [F4] to pause current status.
Press [▲/▼] to move vertical coordinates' position.
Press [◀/▶] to move cursor to select frequency, the signal strength of the selected frequency will be displayed on the
left-top corner.
Move
Press [▲/▼] on channel list, select the channels which you want to edit in channel list by press [Red/F1] Key.
1.
Press [▲/▼] move the cursor to the position you want and press the [OK] key.
2.
3.
Press [EXIT] Key to save the settings.
Lock (Password: 000000)
Press [▲/▼] on channel list, select the channel which you want to edit in channel list by press [Yellow/F3] Key.
1.
2.
Press [Yellow/F3] Key to lock or unlock the channel.
3.
Press [EXIT] Key to save the settings.