Digitek 18ASF-7000 Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Digitek 18ASF-7000. Digitek 18ASF-7000 18 pagina's. Digital signal meter
Pagina afdrukken
Chapter 3: Detailed operation guide.
When you turn on the device, you can see the main menu which consists of Satellite, Terrestrial, System Setting, Program,
Multimedia and Upgrade.
3.1 Satellite
3.1.1 Spectrum Analyzer
Move cursor to "Spectrum Analyzer'' and press "OK'' , then you can enter the "Parameter Setting'' interface.
Press [F1] to switch SPAN of spectrum frequency, FULL as default, the smaller span will show clearer signal status
of frequencies.
Press [F4] to pause current status.
Press [▲/▼] to move vertical coordinates' position.
Press [◀/▶] to move cursor to select frequency, the signal strength of the selected frequency will be displayed on the
left-top corner.
Move
Press [▲/▼] on channel list, select the channels which you want to edit in channel list by press [Red/F1] Key.
1.
Press [▲/▼] move the cursor to the position you want and press the [OK] key.
2.
3.
Press [EXIT] Key to save the settings.
Lock (Password: 000000)
Press [▲/▼] on channel list, select the channel which you want to edit in channel list by press [Yellow/F3] Key.
1.
2.
Press [Yellow/F3] Key to lock or unlock the channel.
3.
Press [EXIT] Key to save the settings.