- ページ 4

ネットワーク・ハードウェア Cisco Aironet 1140 SeriesのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Aironet 1140 Series 31 ページ。 Autonomous access point
Cisco Aironet 1140 Series にも：スタートマニュアル (35 ページ), 設定マニュアル (40 ページ), データシート (6 ページ), スタートマニュアル (37 ページ)

ページを印刷する

22/09/2019

Caution When mounting the access point to a wall or ceiling, be sure to use appropriate fasteners.

The fasteners used must be capable of maintaining a minimum pullout force of 20 lbs (9

kg) and must use all 4 indented holes on the low-pro le mounting bracket.

Caution This product and all interconnected equipment must be installed indoors within the same

building, including the associated LAN connections as de ned by Environment A of the

IEEE 802.af Standard.

Note The access point is suitable for use in environmental air space in accordance with section

300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of

the Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or

power injector in air handling spaces.

Note Use only with listed ITE equipment.

3 Overview

This section explains necessary tasks prior to installing the 1140 series access point.

Verifying Shipped Components

To unpack and verify the contents of the 1140 series access point and accessory kit, follow these

steps:

Step 1 Unpack and remove the access point and the accessory kit from the shipping box.

Step 2 Return any packing material to the shipping container and save it for future use.

Step 3 Verify that you have received the items shown in Figure 1. If any item is missing or

damaged, contact your Cisco representative or reseller for instructions.

Figure 1 Shipping Box Contents

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1140/autonomous/getting_started/guide/ap1140aut_getstart.html

Getting Started Guide: Cisco Aironet 1140 Series Autonomous Access Point - Cisco

4/30