Cisco Aironet 1140 Series 시작하기 매뉴얼 - 페이지 4
{카테고리_이름} Cisco Aironet 1140 Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1140 Series 31 페이지. Autonomous access point
Cisco Aironet 1140 Series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (35 페이지), 구성 매뉴얼 (40 페이지), 데이터시트 (6 페이지), 시작하기 매뉴얼 (37 페이지)
페이지 인쇄
22/09/2019
Caution When mounting the access point to a wall or ceiling, be sure to use appropriate fasteners.
The fasteners used must be capable of maintaining a minimum pullout force of 20 lbs (9
kg) and must use all 4 indented holes on the low-pro le mounting bracket.
Caution This product and all interconnected equipment must be installed indoors within the same
building, including the associated LAN connections as de ned by Environment A of the
IEEE 802.af Standard.
Note The access point is suitable for use in environmental air space in accordance with section
300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of
the Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or
power injector in air handling spaces.
Note Use only with listed ITE equipment.
3 Overview
This section explains necessary tasks prior to installing the 1140 series access point.
Verifying Shipped Components
To unpack and verify the contents of the 1140 series access point and accessory kit, follow these
steps:
Step 1 Unpack and remove the access point and the accessory kit from the shipping box.
Step 2 Return any packing material to the shipping container and save it for future use.
Step 3 Verify that you have received the items shown in Figure 1. If any item is missing or
damaged, contact your Cisco representative or reseller for instructions.
Figure 1 Shipping Box Contents
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1140/autonomous/getting_started/guide/ap1140aut_getstart.html
Getting Started Guide: Cisco Aironet 1140 Series Autonomous Access Point - Cisco
4/30