- ページ 28

ネットワーク・ハードウェア Cisco ASA 5506W-XのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco ASA 5506W-X 46 ページ。 Threat defense reimage guide
Cisco ASA 5506W-X にも：クイック・スタート・マニュアル (10 ページ), 設定マニュアル (13 ページ), クイック・スタート・マニュアル (14 ページ), 簡単セットアップマニュアル (11 ページ), ソフトウェアマニュアル (37 ページ), マウント＆コネクト (12 ページ), シャーシをマウントする (10 ページ)

Prevent ESD Damage

Follow these guidelines when working on equipment powered by electricity:

• Before beginning procedures that require access to the interior of the chassis, locate the emergency

• Do not work alone if potentially hazardous conditions exist anywhere in your work space.

• Never assume that power is disconnected; always check.

• Look carefully for possible hazards in your work area, such as moist floors, ungrounded power extension

• If an electrical accident occurs:

• Use the chassis within its marked electrical ratings and product usage instructions.

ESD occurs when electronic components are improperly handled, and it can damage equipment and impair

electrical circuitry, resulting in intermittent or complete failure.

Always follow ESD-prevention procedures when removing and replacing components. Ensure that the chassis

is electrically connected to an earth ground. Wear an ESD-preventive wrist strap, ensuring that it makes good

skin contact. Connect the grounding clip to an unpainted surface of the chassis frame to safely ground ESD

voltages. To properly guard against ESD damage and shocks, the wrist strap and cord must operate effectively.

If no wrist strap is available, ground yourself by touching the metal part of the chassis.

For safety, periodically check the resistance value of the antistatic strap, which should be between one and

10 megohms.

You can place the chassis on a desktop, mount it on a wall, or on a rack shelf. The location of the chassis and

the layout of the equipment rack or wiring room are extremely important for proper system operation. Placing

equipment too close together with inadequate ventilation and inaccessible panels can cause system malfunctions

and shutdowns. Improper placement can also make it difficult for you to access the chassis for maintenance.

Warning

Under no circumstances should you stack more than one chassis on top of one another. This disrupts cooling

air flow to the ASAs and causes damage to the hardware.

Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide

power-off switch for the room in which you are working. Then, if an electrical accident occurs, you can

act quickly to turn off the power.

cables, frayed power cords, and missing safety grounds.

• Use caution; do not become a victim yourself.

• Disconnect power from the system.

• If possible, send another person to get medical aid. Otherwise, assess the condition of the victim,

and then call for help.

• Determine whether the person needs rescue breathing or external cardiac compressions; then take

appropriate action.

Installation Preparation

Online Only