- ページ 10
ステレオシステム Sony PS-HX500のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony PS-HX500 28 ページ。 Stereo turntable system
Sony PS-HX500 にも: サービスマニュアル (26 ページ)
3
Peel off the adhesive tape, pull and
hold the red ribbon, and then hook
the drive belt around the motor
pulley.
Note
• Do not twist the drive belt.
• Be sure to remove it once you have hooked
the drive belt around the motor pulley.
4
Place the rubber mat onto the
platter.
Note
Make sure that the chamfered side of the
rubber mat faces upward.
The back side of the rubber is indicated by the
SONY imprint.
10
Adjusting the tone arm
balance
Adjust the tone arm balance to keep the
tone arm horizontally balanced (zero
balance) so that proper stylus pressure is
exerted on the vinyl record.
1
Remove the stylus protective cover.
Note
Remove the stylus protective cover with care
so as not to damage the stylus.
2
Make sure that the gauge number
"0" on the anti-skating knob is
aligned with the reference line.
Anti-skating Knob
Stylus protective
cover