Sony PS-HX500 Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony PS-HX500. Sony PS-HX500 28 stron. Stereo turntable system
Również dla Sony PS-HX500: Instrukcja serwisowa (26 strony)
3
Peel off the adhesive tape, pull and
hold the red ribbon, and then hook
the drive belt around the motor
pulley.
Note
• Do not twist the drive belt.
• Be sure to remove it once you have hooked
the drive belt around the motor pulley.
4
Place the rubber mat onto the
platter.
Note
Make sure that the chamfered side of the
rubber mat faces upward.
The back side of the rubber is indicated by the
SONY imprint.
10
Adjusting the tone arm
balance
Adjust the tone arm balance to keep the
tone arm horizontally balanced (zero
balance) so that proper stylus pressure is
exerted on the vinyl record.
1
Remove the stylus protective cover.
Note
Remove the stylus protective cover with care
so as not to damage the stylus.
2
Make sure that the gauge number
"0" on the anti-skating knob is
aligned with the reference line.
Anti-skating Knob
Stylus protective
cover