- ページ 16

ラボラトリー機器 Digitimer D188のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Digitimer D188 20 ページ。 Remote electrode selector

Digitimer Ltd – D188 Operator's Manual

Version 1.2

Connecting the D188 to an Electrical Stimulator

The D188 is limited to a maximum input voltage of 400V and a maximum current of 1A. It should not

be used with stimulators delivering higher levels than this. The D188 is fitted with a pair of 1.5mm

touch proof DIN 42802 sockets, labelled "COM" which are used to connect the stimulation source to the

D188.

D188-09 (2m long) or D188-10 (50cm long) cables are required to attach the D188 input to our popular

D185-HB4 Output Extension Cables.

If a D185-HB4 cable is not used, we offer the D188-12, which is a 50cm pair of cables with 4mm touch-

proof connectors at the stimulator end and 1.5mm touch-proof female connectors at the D188 end.

As our non-human research stimulators are fitted with 2mm touch-proof sockets, so we offer the 50cm

long D188-11 cables to connect from this 2mm output to the 1.5mm input of the D188.

If the stimulator to be used has an alternative type of output socket, the operator can remove plugs from

one end of the cables above and re-solder with an alternative which is compatible with the stimulator.

Digitimer supplies some plugs, but these are usually of a type compatible with our own clinical and

research stimulators. Please contact us for details.

The D188 output connectors are also 1.5mm touch proof DIN 42802 sockets, which are compatible with

many of the electrodes Digitimer offers for human electrical stimulation, including bar electrodes and