- ページ 10

ネットワーク・ハードウェア Cisco ASR 9000 SeriesのPDF ネットワーク設定の構成をオンラインで閲覧またはダウンロードできます。Cisco ASR 9000 Series 26 ページ。 Line card
Cisco ASR 9000 Series にも：設定マニュアル (46 ページ), 設定マニュアル (50 ページ), マニュアル (24 ページ), 設定 (46 ページ), マニュアル (44 ページ), クイック・リファレンス・マニュアル (7 ページ)

Implementing a Satellite nV System

Command or Action

Step 7

ipv4 address address

Example:

RP/0/RSP0/CPU0:router(config-nV)# ipv4

address 10.22.1.2

Step 8

end

commit

Example:

RP/0/0RSP0/CPU0:router(config)# end

RP/0/RSP0/CPU0:router(config)# commit

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Configuration Guide

HC-716

Configuring the Satellite Network Virtualization (nV) System on the Cisco ASR 9000 Series Router

Purpose

Specifies the IP address to assign to the satellite. ICPE sets up a

connected route to the specified IP address through all configured

ICLs.

Saves configuration changes.

•

When you issue the end command, the system prompts you to

commit changes:

Uncommitted changes found, commit them before

exiting(yes/no/cancel)?

[cancel]:

–

Entering yes saves configuration changes to the running

configuration file, exits the configuration session, and

returns the router to EXEC mode.

Entering no exits the configuration session and returns the

–

router to EXEC mode without committing the

configuration changes.

Entering cancel leaves the router in the current

–

configuration session without exiting or committing the

configuration changes.

Use the commit command to save the configuration changes to

•

the running configuration file and remain within the

configuration session.

OL-26061-03