- ページ 41

ネットワーク・ハードウェア Cisco ASR 9000 SeriesのPDF 設定をオンラインで閲覧またはダウンロードできます。Cisco ASR 9000 Series 46 ページ。 Line card
Cisco ASR 9000 Series にも： ネットワーク設定の構成 (26 ページ), 設定マニュアル (46 ページ), 設定マニュアル (50 ページ), マニュアル (24 ページ), マニュアル (44 ページ), クイック・リファレンス・マニュアル (7 ページ)

ページを印刷する
Cisco ASR 9000 Series 設定
Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
mode c11-t1
width 1
root
controller T1 0/1/1/0/0/1/1
channel-group 0
timeslots 1-12
show configuration
root
interface serial 0/1/1/0/1/1:0
encapsulation ppp
ip address 10.10.10.10 255.255.255.255
no shutdown
commit
show controllers sonet 0/1/1/0
Channelized SDH AU-3 to TUG-2, VC-12, E1 and NxDS0s: Example
This example is not supported on the 1-Port Channelized OC-48/STM-16 SPA.
Note
The following example shows how to configure SDH AU-3 to TUG-2, VC-12 and channelized E1 to
NxDS0s:
configure
controller sonet 0/1/1/0
clock source internal
framing sdh
au 1
mode c12-e1
width 1
root
controller e1 0/1/1/0/0/1/1
channel-group 0
timeslots 1-12
show configuration
root
interface serial 0/1/1/0/1/1:0
encapsulation ppp
ip address 10.10.10.10 255.255.255.255
no shutdown
commit
show controllers sonet 0/1/1/0

Channelized SDH AU-4 Configuration: Examples

This section includes the following configuration examples:
•
•
Channelized SDH AU-4 to TUG-3 and Clear Channel T3/E3: Examples
The following exampe shows SDH AU-4 channelization to TUG-3 and clear channel T3:
configure
controller sonet 0/4/0/0
framing sdh
au 1
width 3
OL-26061-03
Channelized SDH AU-4 to TUG-3 and Clear Channel T3/E3: Examples, page 357
Channelized SDH AU-4 to TUG-3, TUG-2, and T1/E1 and NxDS0: Examples, page 358
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
Configuration Examples for Channelized SONET
HC-357