- ページ 6

ネットワーク・ハードウェア Cisco ATA 191のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco ATA 191 13 ページ。 Analog telephone adapter
Cisco ATA 191 にも：ユーザーマニュアル (30 ページ), 管理マニュアル (4 ページ), ユーザーマニュアル (10 ページ), スタート (8 ページ), マニュアル (10 ページ), セットアップマニュアル (6 ページ), ユーザーマニュアル (40 ページ), ユーザーマニュアル (30 ページ)

Problem Report Tool Button

The Problem Report Tool (PRT) button is on the ATA top panel. Press the PRT button, and a log file is

prepared and uploaded to the server for troubleshooting your network.

You can instruct your analog phone users to press the PRT button on the ATA device to start the PRT log file

process.

One of the following must be completed to upload the PRT log file from the ATA:

• Set up the HTTP server to upload the PRT log file from the ATA.

• Configure the customer support upload URL to best suit your needs, and apply it to the ATA.

ATA 191 Back Panel

The back panel of your ATA has several ports used to connect your device and to power it. The back panel

also has the reset button for resetting the device to the factory settings.

Figure 4: ATA 191 Back Panel

The following table describes the ports that are located on the back panel of your ATA.

Table 2: ATA 191 Back Panel Ports

Port or Button

RESET

PHONE 1

PHONE 2

NETWORK

Cisco ATA 191 Analog Telephone Adapter Overview

Problem Report Tool

Cisco ATA 191 Analog Telephone Adapter Overview

Description

To restart the ATA, use a paper clip or similar object to press this button

briefly.

To restore the factory default settings, press and hold for 10 seconds.

The LED behaviour for the factory reset:

1. After you press and hold the button for about 10 seconds, the Power

LED is fast flashing green.

2. After the factory reset is performed successfully, all LEDs are fast

flashing green for about 5 seconds.

Use an RJ-11 phone cable to connect an analog phone or fax machine.

Use an RJ-11 phone cable to connect a second analog phone or fax

machine.

Use an Ethernet cable to connect to the network.