- ページ 6

カラオケシステム DIGITOP MR ENTERTAINER MKP100のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DIGITOP MR ENTERTAINER MKP100 12 ページ。 Multi-format karaoke player

Remote Control Functions

1. POWER – Turns the MKP100 on, or into standby mode, to turn completely off please

use the button on the front of the player.

2. OSD – Cycles through the different onscreen display options.

3. ANGLE – Cycles through the available viewing angles on DVD's with multiple viewing

options available

4. SUBTITLE – Cycles through the available subtitle languages on a DVD with subtitles

available.

5. PROG – to program tracks press STOP then press PROGRAM. Enter your track

selections and press PROGRAM again to accept. Press the PLAY button to start the

programmed tracks.

6. SETUP – Use this button to access the MKP100 setup page on the video screen.

Select options using the directional buttons and make changes using the ENTER

button on the remote.

7. DIRECTIONAL BUTTONS – The UP and DOWN buttons allow you to navigate through

the DVD menu screens, Setup pages and MP3 menus and adjust the volume of the

microphone output. The LEFT and RIGHT buttons allow you to navigate through the

DVD menu screens, Setup pages and MP3 menus and adjust the amount of echo on

the microphone output. Please note the microphone and echo controls work in disc

mode only. If you want to adjust during USB/SD playback please do so via SETUP.

8. RETURN – accesses the main menu on a VCD 2.0 disc, NOTE, PBC must be turned on

and the VCD must be a VCD 2.0 disc.

9. PLAY/PAUSE – start to play the disc or temporarily suspend playback. Press again to

resume playback.

10. PREV – Skip to the previous track when playing a CDG disc

11. FWD & REV – Scans through a track when in disc mode, FWD scans forwards through

a track, REV scans backwards through a track. NOTE: This function will not work

with CDG discs.

12. RIPPING – For ripping CDG discs to MP3+G, please see 'RIP MP3+G from CD+G discs'

under 'Basic Operation'

13. RESUME – Resumes playback from exact spot where a disc has been stopped in

standby mode.

14. A-B – Loop button, allows you to set a section on a disc for continuous looping.

15. REPEAT – Cycles through the available repeat options.

16. MUTE – Mutes the sound from the disc

17. KEY CONTROL – Lower or raise the key of the track, b button to lower, # button to

raise.

18. OPEN/CLOSE – This button is used to open or close the disc tray.

19. NUMBER/PRESET – Use these buttons to jump directly to a specific track in disc

mode.

20. TIME – Accesses the time menu which allows you to jump directly to a specific time

on a disc.

21. TITLE – Access the title screen on a DVD disc, will only work on DVD's that have title

screens.