DIGITOP MR ENTERTAINER MKP100 Інструкція з експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Караоке-система DIGITOP MR ENTERTAINER MKP100. DIGITOP MR ENTERTAINER MKP100 12 сторінок. Multi-format karaoke player
Друкувати сторінкуRemote Control Functions
1. POWER – Turns the MKP100 on, or into standby mode, to turn completely off please
use the button on the front of the player.
2. OSD – Cycles through the different onscreen display options.
3. ANGLE – Cycles through the available viewing angles on DVD's with multiple viewing
options available
4. SUBTITLE – Cycles through the available subtitle languages on a DVD with subtitles
available.
5. PROG – to program tracks press STOP then press PROGRAM. Enter your track
selections and press PROGRAM again to accept. Press the PLAY button to start the
programmed tracks.
6. SETUP – Use this button to access the MKP100 setup page on the video screen.
Select options using the directional buttons and make changes using the ENTER
button on the remote.
7. DIRECTIONAL BUTTONS – The UP and DOWN buttons allow you to navigate through
the DVD menu screens, Setup pages and MP3 menus and adjust the volume of the
microphone output. The LEFT and RIGHT buttons allow you to navigate through the
DVD menu screens, Setup pages and MP3 menus and adjust the amount of echo on
the microphone output. Please note the microphone and echo controls work in disc
mode only. If you want to adjust during USB/SD playback please do so via SETUP.
8. RETURN – accesses the main menu on a VCD 2.0 disc, NOTE, PBC must be turned on
and the VCD must be a VCD 2.0 disc.
9. PLAY/PAUSE – start to play the disc or temporarily suspend playback. Press again to
resume playback.
10. PREV – Skip to the previous track when playing a CDG disc
11. FWD & REV – Scans through a track when in disc mode, FWD scans forwards through
a track, REV scans backwards through a track. NOTE: This function will not work
with CDG discs.
12. RIPPING – For ripping CDG discs to MP3+G, please see 'RIP MP3+G from CD+G discs'
under 'Basic Operation'
13. RESUME – Resumes playback from exact spot where a disc has been stopped in
standby mode.
14. A-B – Loop button, allows you to set a section on a disc for continuous looping.
15. REPEAT – Cycles through the available repeat options.
16. MUTE – Mutes the sound from the disc
17. KEY CONTROL – Lower or raise the key of the track, b button to lower, # button to
raise.
18. OPEN/CLOSE – This button is used to open or close the disc tray.
19. NUMBER/PRESET – Use these buttons to jump directly to a specific track in disc
mode.
20. TIME – Accesses the time menu which allows you to jump directly to a specific time
on a disc.
21. TITLE – Access the title screen on a DVD disc, will only work on DVD's that have title
screens.
6