- ページ 10

ネットワーク・ハードウェア Cisco Firepower 2110のPDF ソフトウェアマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Firepower 2110 37 ページ。 Rack-mount and ground the chassis
Cisco Firepower 2110 にも：マニュアル (12 ページ), 配備マニュアル (8 ページ), はじめに (42 ページ)

ページを印刷する

Reimage from ASA to Firepower Threat Defense

Enter the netmask: 255.255.255.0

Enter the gateway: 10.123.123.1

Do you want to configure static IPv6 address on management interface?(y/n) [N]: n

Stateless autoconfiguration will be enabled for IPv6 addresses.

Enter the primary DNS server IP address [64.102.6.247]: 10.123.123.2

Do you want to configure Secondary DNS Server? (y/n) [y]: n

Any previously configured secondary DNS servers will be removed.

Do you want to configure Local Domain Name? (y/n) [n]: n

Do you want to configure Search domains? (y/n) [y]: n

Any previously configured search domains will be removed.

Do you want to enable the NTP service? [N]: n

Please review the final configuration:

Hostname: example.cisco.com

Management Interface Configuration

IPv4 Configuration: static

IP Address: 10.123.123.123

Netmask: 255.255.255.0

Gateway: 10.123.123.1

IPv6 Configuration: Stateless autoconfiguration

DNS Configuration:

DNS Server:

10.123.123.2

NTP configuration: Disabled

CAUTION:

You have selected IPv6 stateless autoconfiguration, which assigns a global address

based on network prefix and a device identifier. Although this address is unlikely

to change, if it does change, the system will stop functioning correctly.

We suggest you use static addressing instead.

Apply the changes?(y,n) [Y]: y

Configuration saved successfully!

Applying...

Restarting network services...

Done.

Press ENTER to continue...

firepower-boot>

Step 7

Download the FTD system software install package. This step shows an HTTP installation.

system install [noconfirm] url

Include the noconfirm option if you do not want to respond to confirmation messages.

Example:

> system install noconfirm http://10.86.118.21/ftd-6.0.1-949.pkg

You are prompted to erase the internal flash drive. Enter y.

######################## WARNING ############################

# The content of disk0: will be erased during installation! #

#############################################################

Do you want to continue? [y/N] y

Cisco ASA and Firepower Threat Defense Reimage Guide