Cisco Firepower 2110 Instrukcja oprogramowania - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja oprogramowania dla Sprzęt sieciowy Cisco Firepower 2110. Cisco Firepower 2110 37 stron. Rack-mount and ground the chassis
Również dla Cisco Firepower 2110: Podręcznik (12 strony), Podręcznik wdrażania (8 strony), Pierwsze kroki (42 strony)
Drukuj stronę
Reimage from ASA to Firepower Threat Defense
Enter the netmask: 255.255.255.0
Enter the gateway: 10.123.123.1
Do you want to configure static IPv6 address on management interface?(y/n) [N]: n
Stateless autoconfiguration will be enabled for IPv6 addresses.
Enter the primary DNS server IP address [64.102.6.247]: 10.123.123.2
Do you want to configure Secondary DNS Server? (y/n) [y]: n
Any previously configured secondary DNS servers will be removed.
Do you want to configure Local Domain Name? (y/n) [n]: n
Do you want to configure Search domains? (y/n) [y]: n
Any previously configured search domains will be removed.
Do you want to enable the NTP service? [N]: n
Please review the final configuration:
Hostname: example.cisco.com
Management Interface Configuration
IPv4 Configuration: static
IP Address: 10.123.123.123
Netmask: 255.255.255.0
Gateway: 10.123.123.1
IPv6 Configuration: Stateless autoconfiguration
DNS Configuration:
DNS Server:
10.123.123.2
NTP configuration: Disabled
CAUTION:
You have selected IPv6 stateless autoconfiguration, which assigns a global address
based on network prefix and a device identifier. Although this address is unlikely
to change, if it does change, the system will stop functioning correctly.
We suggest you use static addressing instead.
Apply the changes?(y,n) [Y]: y
Configuration saved successfully!
Applying...
Restarting network services...
Done.
Press ENTER to continue...
firepower-boot>
Step 7
Download the FTD system software install package. This step shows an HTTP installation.
system install [noconfirm] url
Include the noconfirm option if you do not want to respond to confirmation messages.
Example:
> system install noconfirm http://10.86.118.21/ftd-6.0.1-949.pkg
You are prompted to erase the internal flash drive. Enter y.
######################## WARNING ############################
# The content of disk0: will be erased during installation! #
#############################################################
Do you want to continue? [y/N] y
Cisco ASA and Firepower Threat Defense Reimage Guide
10
Cisco ASA and Firepower Threat Defense Reimage Guide