- ページ 6

ネットワーク・ハードウェア Cisco Firepower 4100 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Firepower 4100 Series 8 ページ。 Rack-mount and ground the chassis
Cisco Firepower 4100 Series にも：製品マニュアル (17 ページ), メンテナンスとアップグレードマニュアル (20 ページ), マニュアル (36 ページ), マニュアル (8 ページ), マニュアル (42 ページ), マニュアル (38 ページ)

Ground the Chassis

What to do next

Ground the chassis. See

Install the cables according to your default software configuration as described in the

for your version.

Ground the Chassis

Take note of the following warnings:

Warning

Statement 1024 Ground Conductor

This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground conductor or

operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical

inspection authority or an electrician if you are uncertain that suitable grounding is available.

Warning

Statement 1046 Installing or Replacing the Unit

To reduce risk of electric shock, when installing or replacing the unit, the ground connection must always be

made first and disconnected last.

Warning

Statement 1025 Use Copper Conductors Only

To reduce risk of fire, use copper conductors only.

Caution

Grounding the chassis is required, even if the rack is already grounded. A grounding pad with 2 threaded M4

holes is provided on the chassis for attaching a grounding lug. The ground lug must be NRTL-listed. In

addition, a copper conductor (wires) must be used and the copper conductor must comply with NEC code for

ampacity.

Before you begin

• You need the following items that you provide:

• You need the following items from the accessory kit:

Rack-Mount the Chassis

Ground the Chassis, on page 6

• Wire-striping tool

• Crimping tool

• Grounding cable

• Two star lock washers for the 10-32 x .375-in. screws used to secure the ground lug

• Ground lug #6 AWG, 90 degree, #10 post

for the procedure.

Rack-Mount the Chassis

Getting Started Guide