- ページ 5

コントローラー Digitrax DN166PSのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Digitrax DN166PS 8 ページ。 Complete train control

Other LocoMotion

Features: Switching Speed, Normal

Direction of Travel & Scalable Speed Stabilization

(Back EMF) Features

Switching speed is controlled by CV54. The factory setting is 000 for OFF. To

turn on the switching speed feature, program CV54 to a value of 001. When this

feature is on, use F6 to activate and deactivate switching speed. With the feature

on the throttle's target speed is effectively reduced by about 50% and the effects

of accel and decel programmed into the decoder are reduced by 1/4. This is useful

for yard switching operations.

Normal Direction of Travel is controlled by CV29. See your decoder manual

or the Digitrax Toolbox App for additional information on the settings for CV29.

The intensity, or droop, of Scaleable Speed Stabilization (Back EMF) is

controlled by CV57. The factory setting for this feature is 006 which is suitable for

most locos. You can adjust this value in the range of 000 for OFF to 015 for the

maximum effect. Consult your Digitrax Decoder Manual for info about CVs 55 &

56 and their effects on scaleable speed stabilization.

SuperSonic Silent Operation and Torque Compensation

The factory settings in the decoder provide silent, smooth operation of your loco-

motive under most conditions. For more information about these settings, please

see the Digitrax Decoder Manual or our website.

Digitrax Transponding CV61

Digitrax Transponding is controlled by CV61. The initial factory set value is 000

for OFF. To turn on transponding, program CV61 to a value of 002. This al-

lows you to use Digitrax transponding to keep track of your rolling stock. When

transponding is enabled, the front light of the locomotive will flicker slightly to

indicate transponding signal is being communicated. For optimal transponding

operation, we recommend that you hook up the forward and rear lights as shown

above.

Decoder Reset CV08

Decoder reset lets you reset all CV values to the initial factory settings. To reset all

CV values, program CV08 to a value of 008. You also have the option of resetting

all the CV values except the 28 speed step tables. To do this program CV08 to a

value of 009.

— 5 —