ページを印刷するMultiple Unit Consists (DT400/DT400R/DT402D)
Enter the lead locomotive ID on right side and the second locomotive ID on the left side.
Press Y + to add second locomotive to
Left speed indicator
shows CN.
Flashing smoke indicates which
locomotive responds to function
buttons.
Note: if locomotives are facing the same direction, the left and right direction indicators need to show
the same direction. If locomotives are facing opposite directions, the left and right direction indicators
need to show opposite directions.
Ensure left smoke
is flashing.
Check direction
arrows. (see
below)
Press MU button.
Message briefly
displays Consist.
Message then
alternates + = add
and – remove.
The Mode
Indicator displays
MU.
consist
Control speed for both locomotive
with right knob.
Right speed indicator show power
setting for both locmotives.