- ページ 2

コントローラー Digitrax DZ123MK0のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Digitrax DZ123MK0 8 ページ。 Complete train control

ページを印刷する

Parts List

1 DZ123MK0 Decoder

Installation Information

For Most Z Scale layouts, Digitrax recommends using 8V DC or less for opera-

tion to avoid damage to locomotive motors & shells. See the Digitrax Decoder

Manual for complete decoder test procedures, installation instructions, pro-

gramming and technical information. Digitrax manuals and instructions are

updated periodically. Please visit www.digitrax.com for the latest versions,

technical updates and additional locomotive-specific installation instructions.

Installation Instructions - Marklin Mini Club 88455

1. Carefully remove the locomo-

tive's shell from the frame by

prying the edges of the shell

away from the frame and

allowing it to slide free.

Notice the orientation of the

shell for reinstallation later.

Figure 1.

2. Remove the two screws hold-

ing the factory light board in

place and remove the light

board. Be sure to save the

screws for reinstallation of the

DZ123MK0. Figure 2.

3. Prepare the DZ123MK0 for

installation by using a pair of

needle nose pliers to bend the

motor contacts and light pick-

ups into the proper shape. The

motor contacts should be bent

downwards at a 30 or 45

degree angle through the open

space in the board. The light

pickups should be bent accord-

ing to the bend guide at right,

Figure 3. It may be helpful to

compare the bends to those on

the factory light board and

attempt to match the shape.

Be gentle with bending the

leads to avoid any breakage.

Complete Train Control

Run Your Trains, Not Your Track!

Figure 1:

Remove loco shell

Figure 2: Remove the two screws holding the

factory light board in place.

www.digitrax.com

1 Instruction sheet

Actual size

Bend

Guide