- ページ 3

セキュリティセンサー B.one B1MS02-ZW-AUのPDF マニュアルをオンラインで閲覧またはダウンロードできます。B.one B1MS02-ZW-AU 9 ページ。

ページを印刷する
B.one B1MS02-ZW-AU マニュアル
5. Place the sensor to anywhere you want.
Ⅲ. ADDING/REMOVING THE DEVICE
Adding
1) Open the cover.
2) Place the device within the direct range of your Z-Wave controller.
3) Set the main controller in security add mode (see the controller's manual).
4) Click the Z-button once or triple click the Z-button quickly, the LED indicator should blink fast.
5) Wait for the adding process to end.
6) Successful adding will be confirmed by the Z-Wave controller's message.
NOTE
If you want your motion sensor to be a security device that use secure/
！
encrypted message to communicate in a Z-Wave network, you need to
buy a Security Enabled Z-Wave Controller or Gateway ,then refer to the
Controller or Gateway's user manual to include it as a secure device .