B.one B1MS02-ZW-AU Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} B.one B1MS02-ZW-AU. B.one B1MS02-ZW-AU 9 pagina's.

5. Place the sensor to anywhere you want.

Ⅲ. ADDING/REMOVING THE DEVICE

Adding

1) Open the cover.

2) Place the device within the direct range of your Z-Wave controller.

3) Set the main controller in security add mode (see the controller's manual).

4) Click the Z-button once or triple click the Z-button quickly, the LED indicator should blink fast.

5) Wait for the adding process to end.

6) Successful adding will be confirmed by the Z-Wave controller's message.

NOTE

If you want your motion sensor to be a security device that use secure/

！

encrypted message to communicate in a Z-Wave network, you need to

buy a Security Enabled Z-Wave Controller or Gateway ,then refer to the

Controller or Gateway's user manual to include it as a secure device .