- ページ 11

ネットワーク・ハードウェア Cisco PIX 501のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco PIX 501 18 ページ。 Data sheet
Cisco PIX 501 にも：クイック・スタート・マニュアル (20 ページ), データシート (8 ページ), クイック・スタート・マニュアル (21 ページ), クイック・スタート・マニュアル (20 ページ)

Create a Password

The PIX 501 includes two types of passwords:

the enable (administrative) password and a

Telnet password. There is no preconfigured

enable password; however, the Telnet password

is cisco. For improved security, we recommend

that you create an enable password and change

the Telnet password.

When creating passwords, follow these

guidelines:

• Passwords can be a maximum of

16 characters in length.

• Password characters can consist of

alphanumeric or special characters except

for the question mark or space.

• Passwords are case-sensitive, for example, an uppercase "A" is recognized differently from a

lowercase "a."

To create passwords using PDM:

Click the System Properties tab.

Step 1

Click PIX Administration>Password in the Categories tree. The Password panel appears that

Step 2

lets you set the enable password and change the Telnet password.

Under Enable Password, skip the Old Password box and enter the new password in the New

Step 3

Password box.

Step 4

Reenter the new password in the Confirm New Password box.

Click Apply to PIX to save the new password.

Step 5

Under Telnet Password, enter cisco in the Old Password box.

Step 6

Enter the new password in the New Password box.

Step 7

Reenter the new password in the Confirm New Password box.

Step 8

Step 9

Click Apply to PIX to save the new password.