Cisco PIX 501 Panduan Memulai Cepat - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Cisco PIX 501. Cisco PIX 501 18 halaman. Data sheet
Juga untuk Cisco PIX 501: Panduan Memulai Cepat (20 halaman), Lembar data (8 halaman), Panduan Memulai Cepat (21 halaman), Panduan Memulai Cepat (20 halaman)

Halaman Cetak
Cisco PIX 501 Panduan Memulai Cepat
Create a Password
The PIX 501 includes two types of passwords:
the enable (administrative) password and a
Telnet password. There is no preconfigured
enable password; however, the Telnet password
is cisco. For improved security, we recommend
that you create an enable password and change
the Telnet password.
When creating passwords, follow these
guidelines:
• Passwords can be a maximum of
16 characters in length.
• Password characters can consist of
alphanumeric or special characters except
for the question mark or space.
• Passwords are case-sensitive, for example, an uppercase "A" is recognized differently from a
lowercase "a."
To create passwords using PDM:
Click the System Properties tab.
Step 1
Click PIX Administration>Password in the Categories tree. The Password panel appears that
Step 2
lets you set the enable password and change the Telnet password.
Under Enable Password, skip the Old Password box and enter the new password in the New
Step 3
Password box.
Step 4
Reenter the new password in the Confirm New Password box.
Click Apply to PIX to save the new password.
Step 5
Under Telnet Password, enter cisco in the Old Password box.
Step 6
Enter the new password in the New Password box.
Step 7
Reenter the new password in the Confirm New Password box.
Step 8
Step 9
Click Apply to PIX to save the new password.
11