- ページ 7

ネットワーク・ハードウェア Cisco SG 100D-08のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco SG 100D-08 13 ページ。 Unmanaged gigabit switch with qos
Cisco SG 100D-08 にも：クイック・スタート・マニュアル (8 ページ), クイック・スタート・マニュアル (13 ページ)

ページを印刷する

Connecting the Equipment

This section describes the process for connecting the device to the

network.

Power down all of the devices you want to connect to the switch.

TEP

Connect the Ethernet cable to the Ethernet port of a PC, printer,

TEP

network storage, or other network device.

We recommend using Cat5e or better cable. Also, do not

OTE

exceed the maximum cabling distance of 328 feet (100 meters)

per segment.

Connect the other end of the network Ethernet cable to one of the

TEP

numbered unmanaged switch Ethernet ports.

Repeat

TEP

the unmanaged switch.

Make sure you use the power adapter included with the

AUTION

switch. Using a different power adapter might damage the

switch.

Connect the power adapter to the power port on the back panel of

TEP

the unmanaged switch.

Power up the devices connected to the switch. The LED of each

TEP

active port on the switch lights.

To prioritize voice or video traffic by using the QoS feature on the

OTE

Cisco SG 100D-08, set flow control to off in the configurations

of the connected devices. Otherwise, flow control might send a

pause frame to the switch, blocking the high-priority QoS

packets queued on the port. On some devices, such as some IP

phones and IP cameras, flow control might not be configurable.

Step 2

and

Step 3

Cisco SG100D-08 Unmanaged Gigabit Switch Quick Start Guide

for each device you want to connect to