- ページ 11

ネットワーク・ハードウェア Cisco TelePresence MCU MSE SeriesのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco TelePresence MCU MSE Series 15 ページ。 Accessing conferences

Selecting participants using ConferenceMe

When using ConferenceMe you can scroll through participants in the same way as

you would using a hardware endpoint.

Use the Left/Right keys on your keyboard to scroll through participants.

Alternatively, you can select Next participant from the right-click menu.

Selecting participants using Movi

When using Movi you can use the DTMF keypad to scroll through participants.

Use the 4/6 keys on the keypad to scroll through participants.

Controlling another participant's camera

During a conference, you might need to change the camera settings for one of the

conference participants. To do this, use FECC or DTMF tones.

Enable FECC or DTMF tones, depending on your video endpoint.

Select the participant whose camera you want to control. Refer to Selecting

participants earlier in this document.

Press zoom in (or 1 if using DTMF tones) to enter the mode which passes the

navigation and zoom controls through to the participant's camera.

Use FECC or DTMF tones to control the participant's camera.

To stop controlling the participant's camera, wait five seconds.

The table below describes the icons that appear on-screen.

Icon

Meaning

You are now controlling the far-end video camera

You are moving the far-end video camera to the left or right.

(If you are using the numeric keypad to navigate, use 4 for left

and 6 for right)

You are moving the far-end video camera up and down.

(If you are using the numeric keypad to navigate, use 2 for up

and 8 for down)

Using in-conference features