Cisco TelePresence MCU MSE Series Podręcznik dla początkujących - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Sprzęt sieciowy Cisco TelePresence MCU MSE Series. Cisco TelePresence MCU MSE Series 15 stron. Accessing conferences
Drukuj stronę
Selecting participants using ConferenceMe
When using ConferenceMe you can scroll through participants in the same way as
you would using a hardware endpoint.
Use the Left/Right keys on your keyboard to scroll through participants.
Alternatively, you can select Next participant from the right-click menu.
Selecting participants using Movi
When using Movi you can use the DTMF keypad to scroll through participants.
Use the 4/6 keys on the keypad to scroll through participants.
Controlling another participant's camera
During a conference, you might need to change the camera settings for one of the
conference participants. To do this, use FECC or DTMF tones.
1
Enable FECC or DTMF tones, depending on your video endpoint.
2
Select the participant whose camera you want to control. Refer to Selecting
participants earlier in this document.
3
Press zoom in (or 1 if using DTMF tones) to enter the mode which passes the
navigation and zoom controls through to the participant's camera.
4
Use FECC or DTMF tones to control the participant's camera.
5
To stop controlling the participant's camera, wait five seconds.
The table below describes the icons that appear on-screen.
Icon
Meaning
You are now controlling the far-end video camera
You are moving the far-end video camera to the left or right.
(If you are using the numeric keypad to navigate, use 4 for left
and 6 for right)
You are moving the far-end video camera up and down.
(If you are using the numeric keypad to navigate, use 2 for up
and 8 for down)
Using in-conference features
11