- ページ 18

ネットワーク・ハードウェア Cisco UCS B200 M3のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco UCS B200 M3 34 ページ。 Blade server
Cisco UCS B200 M3 にも：インストールとサービスノート (36 ページ), インストールとサービスノート (37 ページ), マニュアル (8 ページ), アップグレードマニュアル (21 ページ), インストールとサービスノート (28 ページ)

Procedure

Step 1

(Optional) If you are installing a CPU in a socket that had been shipped empty, there will be a protective cap intended to

prevent bent or touched contact pins. The pick and pull cap tool provided can be used in a manner similar to a pair of

tweezers. Grasp the protective cap and pivot as shown.

Figure 13: Protective Cap Removal

Step 2

Release the catch on the pick and place tool by pressing the handle/button.

Step 3

Remove the new CPU from the packaging, and load it into the pick and place tool as follows:

a) Confirm that the pedestal is set up correctly for your processor. The pedestal ships configured with the markings

"LGA2011-R0" facing upward, and this is the correct orientation.

b) Place the CPU on the pedestal. The CPU corners should fit snugly at the pedestal corners and the notches should meet

the pegs perfectly.

c) Place the CPU pick and place tool on the CPU pedestal aligned with the A1 arrow pointing to the A1 registration mark

on the pedestal.

d) Press the button/handle on the tool to grasp the CPU.