- ページ 14

ネットワーク・ハードウェア Cisco UCS B200 M3のPDF インストールとサービスノートをオンラインで閲覧またはダウンロードできます。Cisco UCS B200 M3 36 ページ。 Blade server
Cisco UCS B200 M3 にも：インストレーション・マニュアル (34 ページ), インストールとサービスノート (37 ページ), マニュアル (8 ページ), アップグレードマニュアル (21 ページ), インストールとサービスノート (28 ページ)

Secure Digital (SD) Card Access

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m

Figure 5

Step 2

Open the ejector lever in the front of the blade server.

Step 3

Gently slide the blade into the opening until you cannot push it any farther.

Step 4

Press the ejector lever so that it catches the edge of the chassis and presses the blade server all the way in.

Tighten the captive screw on the front of the blade to no more than 3 in-lbs. Tightening with bare fingers

Step 5

only is unlikely to lead to stripped or damaged captive screws.

Step 6

Power on the server. UCS Manager automatically reacknowledges, reassociates, and recommissions the

server, provided any hardware changes are allowed by the service profile.

Figure 5

upper slots of the chassis.

Secure Digital (SD) Card Access

SD card slots are provided for future usage. Their use is not supported at product release. They will

require a future software update to be used.

Cisco UCS B200 M3 Blade Server Installation and Service Note

Positioning a Blade Server in the Chassis

shows the positioning of a blade server in the chassis. Blade servers reside within the eight

OL-26624-01