Cisco UCS B200 M3 Nota de instalação e manutenção - Página 14

Procurar online ou descarregar pdf Nota de instalação e manutenção para Hardware de rede Cisco UCS B200 M3. Cisco UCS B200 M3 36 páginas. Blade server
Também para Cisco UCS B200 M3: Manual de instalação (34 páginas), Nota de instalação e manutenção (37 páginas), Manual (8 páginas), Upgrade Manual (21 páginas), Nota de instalação e manutenção (28 páginas)

Secure Digital (SD) Card Access

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m

Figure 5

Step 2

Open the ejector lever in the front of the blade server.

Step 3

Gently slide the blade into the opening until you cannot push it any farther.

Step 4

Press the ejector lever so that it catches the edge of the chassis and presses the blade server all the way in.

Tighten the captive screw on the front of the blade to no more than 3 in-lbs. Tightening with bare fingers

Step 5

only is unlikely to lead to stripped or damaged captive screws.

Step 6

Power on the server. UCS Manager automatically reacknowledges, reassociates, and recommissions the

server, provided any hardware changes are allowed by the service profile.

Figure 5

upper slots of the chassis.

Secure Digital (SD) Card Access

SD card slots are provided for future usage. Their use is not supported at product release. They will

require a future software update to be used.

Cisco UCS B200 M3 Blade Server Installation and Service Note

Positioning a Blade Server in the Chassis

shows the positioning of a blade server in the chassis. Blade servers reside within the eight

OL-26624-01