- ページ 26

ネットワーク・ハードウェア Cisco UCS X10cのPDF インストレーション＆サービスマニュアルをオンラインで閲覧またはダウンロードできます。Cisco UCS X10c 38 ページ。 Front mezzanine gpu module

Installing a GPU Card

Step 1

When the GPU cage is vertical, use a #2 Phillips screwdriver to loosen the captive Phillips-head screw at the bottom of

the GPU slot.

Step 2

Grasping the bracket and the opposite edge of the GPU, slide the GPU straight up to remove it from the GPU cage.

What to do next

Choose the appropriate option.

•

Installing a GPU Card

Use this task to install a supported GPU card (UCSX-GPU-T4-MEZZ) in the GPU slots in the GPU cage.

Step 1

Using the GPU card's bracket, align the GPU with its slot in the GPU cage.

Each slot in the GPU cage has a notch that catches the GPU bracket.

Step 2

Slide the GPU into its socket, making sure that the PCI connector seats into the socket inside the GPU cage.

Note

If the GPU does not easily slide into the socket, gently remove it and verify that it is a Cisco T4 GPU

(UCSX-GPU-T4-MEZZ).

Step 3

Using a #2 Phillips screwdriver, tighten the captive Phillips-head screw to 5 in-lbs of torque.

Cisco UCS X10c Front Mezzanine GPU Module Installation and Service Guide

Installing a GPU Card, on page

Installing a GPU Filler Blank, on page

Installing a GPU Cage, on page

18.

20.

16.

Servicing the GPU Module