Cisco UCS X10c Посібник з монтажу та обслуговування - Сторінка 26
Переглянути онлайн або завантажити pdf Посібник з монтажу та обслуговування для Мережеве обладнання Cisco UCS X10c. Cisco UCS X10c 38 сторінок. Front mezzanine gpu module
Друкувати сторінку
Installing a GPU Card
Step 1
When the GPU cage is vertical, use a #2 Phillips screwdriver to loosen the captive Phillips-head screw at the bottom of
the GPU slot.
Step 2
Grasping the bracket and the opposite edge of the GPU, slide the GPU straight up to remove it from the GPU cage.
What to do next
Choose the appropriate option.
•
•
•
Installing a GPU Card
Use this task to install a supported GPU card (UCSX-GPU-T4-MEZZ) in the GPU slots in the GPU cage.
Step 1
Using the GPU card's bracket, align the GPU with its slot in the GPU cage.
Each slot in the GPU cage has a notch that catches the GPU bracket.
Step 2
Slide the GPU into its socket, making sure that the PCI connector seats into the socket inside the GPU cage.
Note
If the GPU does not easily slide into the socket, gently remove it and verify that it is a Cisco T4 GPU
(UCSX-GPU-T4-MEZZ).
Step 3
Using a #2 Phillips screwdriver, tighten the captive Phillips-head screw to 5 in-lbs of torque.
Cisco UCS X10c Front Mezzanine GPU Module Installation and Service Guide
18
Installing a GPU Card, on page
Installing a GPU Filler Blank, on page
Installing a GPU Cage, on page
18.
20.
16.
Servicing the GPU Module