- ページ 40

サーバー Cisco C880 M4のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Cisco C880 M4 48 ページ。 System event log collection
Cisco C880 M4 にも：サービス補足マニュアル (27 ページ), ハードウェア・インストール・マニュアル (23 ページ), クイック・スタート・マニュアル (2 ページ), ファームウェア・アップデート・マニュアル (5 ページ)

Drives "dead" on System Start

9.1.7.

Incorrect cabling

Ensure that the cabling correspond to the original status.

Configuration of the RAID controller incorrect

Call up the RAID utility from the configuration disk or from the controller BIOS of the RAID controller, and

correct the settings for the drives.

You will find further notes in the RAID controller documentation.

9.1.8.

This error message can have the following cause:

RAID controller not configured for the drive

Installation was occurred with the system switched off.

Configure the RAID controller retroactively for the drive. You will find information on this topic in the

RAID controller documentation

Re-install the drive with the system switched ON.

If the drive is still found to be incorrect, it must be replaced (see

on page

25).

Operating Manual

9.1Problem Solutions and Tips

section "

Hot-Plug for Hard Disk Drives