- ページ 16

サーバー Cisco Firepower 1120のPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Firepower 1120 30 ページ。 Connected grid router
Cisco Firepower 1120 にも：インストレーション・マニュアル (6 ページ), クイック・スタート・マニュアル (10 ページ), マニュアル (6 ページ), ハードウェア・インストール・マニュアル (42 ページ), 配備マニュアル (8 ページ), はじめに (42 ページ), ハードウェア・インストール・マニュアル (42 ページ)

Installation Warnings

Warning

Statement 1017—Restricted Area

This unit is intended for installation in restricted access areas. A restricted access area can be accessed by

skilled, instructed or qualified personnel.

Warning

Statement 1030—Equipment Installation

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Warning

Statement 1004—Installation Instructions

Read the installation instructions before using, installing or connecting the system to the power source.

Warning

Statement 12—Power Supply Disconnection Warning

Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect

the power at the circuit breaker on DC units.

Warning

Statement 43—Jewelry Removal Warning

Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces,

and watches). Metal objects will heat up when connected to power and ground and can cause serious burns

or weld the metal object to the terminals.

Warning

Statement 94—Wrist Strap Warning

During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch

the backplane with your hand or any metal tool, or you could shock yourself.

Warning

Statement 1005—Circuit Breaker

This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the

protective device is rated not greater than: 20 A, 120 V, and 16 A, 250 V

Warning

Statement 1045—Short-Circuit Protection

This product requires short-circuit (overcurrent) protection to be provided as part of the building installation.

Install only in accordance with national and local wiring regulations.

Cisco Firepower 1100 Series Hardware Installation Guide

Installation Preparation