- ページ 2
サーバー Cisco Firepower 1120のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Firepower 1120 6 ページ。 Connected grid router
Cisco Firepower 1120 にも： ハードウェア・インストール・マニュアル (30 ページ), クイック・スタート・マニュアル (10 ページ), マニュアル (6 ページ), ハードウェア・インストール・マニュアル (42 ページ), 配備マニュアル (8 ページ), はじめに (42 ページ), ハードウェア・インストール・マニュアル (42 ページ)
ページを印刷する
Installation Safety and Site Preparation
Safety Recommendations
Warning:
IMPORTANT SAFETY INSTRUCTIONS. This warning symbol means danger. You are in a situation that could
cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry
and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device. Statement
1071
SAVE THESE INSTRUCTIONS
Warning:
Hot Surface
Note:
Power Supply Heatsink may be hot to the
touch
Safety Recommendations
Follow these guidelines to ensure general safety:
Keep the chassis area clear and dust-free during and after installation.
Keep tools and chassis components away from walk areas.
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll up your sleeves.
Wear safety glasses when working under conditions that might be hazardous to your eyes.
Do not perform any action that creates a hazard to people or makes the equipment unsafe.
Safety with Electricity
Follow these guidelines when working on equipment powered by electricity:
Locate the emergency power-off switch in the room in which you are working. If an electrical accident occurs, you
can quickly turn off the power.
Disconnect all power before doing the following:
—
Installing or removing a chassis
—
Working near power supplies
Look carefully for possible hazards in your work area, such as moist floors, ungrounded power extension cables,
frayed power cords, and missing safety grounds.
Do not work alone if hazardous conditions exist.
6