- ページ 16

サーバー Cisco Firepower 2130のPDF インストレーション＆メンテナンスをオンラインで閲覧またはダウンロードできます。Cisco Firepower 2130 26 ページ。 Rack-mount and ground the chassis
Cisco Firepower 2130 にも：マニュアル (12 ページ), 配備マニュアル (8 ページ), はじめに (42 ページ)

ページを印刷する

Secure the Power Cord on the Power Supply Module

One side of the tie wrap has evenly spaced ridges and the other is smooth. Be sure the ridged side is face up and that you

slide it through the open side of the channel. You will hear a click as the tie slides through—it moves in one direction

only. To remove the tie wrap from the clamp, push the lever on the closed side of the box-shaped channel and slide out

the tie wrap.

Figure 7: Tie Wrap Through the Box Channel of the Clamp

Box channel

Step 2

Attach the clamp to the power supply module:

a) Locate the hexagonal ventilation hole on the power supply module at the center of the plug just below the power

connector body (see the following figures).

b) Plug the snapping portion of the tie wrap into the hexagonal hole.

c) With the clamp side facing up, push the tie wrap in until it is fully engaged.

Caution

Installation, Maintenance, and Upgrade

Make sure you have the correct location because you cannot remove the tie wrap from the power supply

module once you have installed it without damaging the tie wrap.

Installation, Maintenance, and Upgrade

Tie wrap