- ページ 13

サーバー Cisco ONS 15454のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Cisco ONS 15454 22 ページ。 Four-shelf and zero-shelf bay assembly
Cisco ONS 15454 にも：インストール (32 ページ), インストール (32 ページ), 開梱と設置 (42 ページ), 開梱と設置 (40 ページ)

ページを印刷する

Chapter 2 Install Cards and Fiber-Optic Cable

Stop. You have completed this procedure.

NTP-A274 Install the FC_MR-4 Card

Purpose

Tools/Equipment

Prerequisite Procedures

Required/As Needed

Onsite/Remote

Security Level

During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly

Warning

touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94

Class I (CDRH) and Class 1M (IEC) laser products. Statement 1055

Warning

Invisible laser radiation could be emitted from the end of the unterminated fiber cable or connector.

Warning

Do not stare into the beam directly with optical instruments. Viewing the laser output with certain

optical instruments (for example, eye loupes, magnifiers, and microscopes) within a distance of

100 mm could pose an eye hazard. Statement 1056

Use of controls, adjustments, or performing procedures other than those specified may result in

Warning

hazardous radiation exposure. Statement 1057

Warning

High-performance devices on this card can get hot during operation. To remove the card, hold it by

the faceplate and bottom edge. Allow the card to cool before touching any other part of it or before

placing it in an antistatic bag. Statement 201

Always use the supplied ESD wristband when working with a powered ONS 15454. Plug the wristband

Caution

cable into the ESD jack located on the lower-right outside edge of the shelf assembly.

If protective clips are installed on the backplane connectors of the cards, remove the clips before

Note

installing the cards.

78-17697-01

This procedure installs the FC_MR-4 card, also known as the Fibre

Channel card.

FC_MR-4 card(s)

NTP-A15 Install the Common Control Cards, page 2-2

As needed

Onsite

None

NTP- A274 Install the FC_MR-4 Card

Cisco ONS 15454 Procedure Guide, R8.0

2-13