- ページ 19

サーバー Cisco UCS B200 M3のPDF インストールとサービスノートをオンラインで閲覧またはダウンロードできます。Cisco UCS B200 M3 28 ページ。 Blade server
Cisco UCS B200 M3 にも： インストレーション・マニュアル (34 ページ), インストールとサービスノート (36 ページ), インストールとサービスノート (37 ページ), マニュアル (8 ページ), アップグレードマニュアル (21 ページ)

ページを印刷する
Cisco UCS B200 M3 インストールとサービスノート
Supported DIMMs
The DIMMs supported in this blade server are constantly being updated. A list of currently supported and available DIMMs is in the
specification sheets at:
http://www.cisco.com/en/US/products/ps10280/products_data_sheets_list.html
Do not use any memory DIMMs other than those listed in the specification sheet. Doing so may irreparably damage the server and
require down time.
Memory Population
The blade server contains 24 DIMM slots—12 for each CPU. Each set of 12 DIMM slots is arranged into four channels, where each
channel has three DIMMs.
Figure 16: Memory Slots within the Blade Server
1
Channels A-D for CPU 1
2
Channels E-H for CPU 2
DIMMs and Channels
Each channel is identified by a letter—A, B, C, D for CPU1, and E, F, G, H for CPU 2. Each DIMM slot is numbered 0, 1, or 2. Note
that each DIMM slot 0 is blue, each slot 1 is black, and each slot 2 is off-white or beige.
The figure below shows how DIMMs and channels are physically laid out on the blade server. The DIMM slots in the upper and
lower right are associated with the second CPU (CPU shown on right in the diagram), while the DIMM slots in the upper and lower
left are associated with the first CPU (CPU shown on left).
Figure 17: Physical Representation of DIMMs and Channels
19