- ページ 17

サーバー Cisco UCS B420 M3のPDF インストールとサービスノートをオンラインで閲覧またはダウンロードできます。Cisco UCS B420 M3 38 ページ。 High performance blade server
Cisco UCS B420 M3 にも：アップグレードマニュアル (8 ページ)

ページを印刷する

c) Lift the tool and CPU straight up.

Figure 11: Proper Alignment of CPU Pick and Place Tool

Alignment mark on the button/handle of the pick and

place tool

Installing a New CPU and Heat Sink

Before installing a new CPU in a server, verify the following:

• The CPU is supported for that given server model. Refer to the Specification Sheet for this server to see the list of supported

CPUs. The Specification Sheets are available at this URL:

ucs-b-series-blade-servers/datasheet-listing.html

• A BIOS update is available and installed that supports the CPU and the given server configuration.

• If the server will be managed by Cisco UCS Manager, the service profile for this server in Cisco UCS Manager will recognize

and allow the new CPU.

The Pick-and-Place tools used in this procedure are required to prevent damage to the contact pins between

Caution

the motherboard and the CPU. Do not attempt this procedure without the required tools, which are included

with each CPU option kit. If you do not have the tool, you can order a spare.

Alignment mark on the socket

http://www.cisco.com/c/en/us/products/servers-unified-computing/