- ページ 27

サーバー Cisco UCS B420 M3のPDF インストールとサービスノートをオンラインで閲覧またはダウンロードできます。Cisco UCS B420 M3 38 ページ。 High performance blade server
Cisco UCS B420 M3 にも：アップグレードマニュアル (8 ページ)

ページを印刷する

• DDR3, 1600 millions of transfers per second (MT/s) across four Channels

• 12 DIMMs per CPU (48 DIMMs total)

• Maximum capacity of 1536 GB (using 32-GB DIMMs)

Performance is less than optimal if the following memory configurations are used:

• Mixing DIMM sizes and densities

• Unevenly populating DIMMs between CPUs

Depending on the application needed, performance loss might or might not be noticeable or measurable.

Installing a Virtual Interface Card Adapter

You must remove the adapter card to service it.

Note

To install a Cisco VIC 1340 or VIC 1240 in the blade server, follow these steps:

Procedure

Step 1

Position the VIC board connector above the motherboard connector and align the captive screw to the standoff post on

the motherboard.

Step 2

Firmly press the VIC board connector into the motherboard connector.

Step 3

Tighten the captive screw.