Cisco UCS B420 M3 설치 및 서비스 참고 사항 - 페이지 27

{카테고리_이름} Cisco UCS B420 M3에 대한 설치 및 서비스 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B420 M3 38 페이지. High performance blade server
Cisco UCS B420 M3에 대해서도 마찬가지입니다: 업그레이드 매뉴얼 (8 페이지)

페이지 인쇄

• DDR3, 1600 millions of transfers per second (MT/s) across four Channels

• 12 DIMMs per CPU (48 DIMMs total)

• Maximum capacity of 1536 GB (using 32-GB DIMMs)

Performance is less than optimal if the following memory configurations are used:

• Mixing DIMM sizes and densities

• Unevenly populating DIMMs between CPUs

Depending on the application needed, performance loss might or might not be noticeable or measurable.

Installing a Virtual Interface Card Adapter

You must remove the adapter card to service it.

Note

To install a Cisco VIC 1340 or VIC 1240 in the blade server, follow these steps:

Procedure

Step 1

Position the VIC board connector above the motherboard connector and align the captive screw to the standoff post on

the motherboard.

Step 2

Firmly press the VIC board connector into the motherboard connector.

Step 3

Tighten the captive screw.