- ページ 30

サーバー Cisco UCS C220 M3のPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Cisco UCS C220 M3 33 ページ。 Security manager 4.3
Cisco UCS C220 M3 にも：クイック・スタート・マニュアル (29 ページ), アップグレードマニュアル (10 ページ), クイック・スタート・マニュアル (12 ページ)

Step 9: After the reconstruction is complete, you can view the changed RAID level in the Virtual Drives pane.

Using the LSI MegaCLI Utility

The LSI MegaCLI utility can be used to obtain information from the LSI RAID controller. MegaCLI can also be used

to create RAID volumes, migrate the RAID level, and troubleshoot.

MegaCLI supports Microsoft Windows, Linux, VMware, Solaris, DOS, and free BSD. Download MegaCLI and unzip

the file. Then choose the right installation package for your operating system. For information about installation

procedures, problem fixes, and supported RAID controllers, see the 8.0.4.07_MegaCLI.txt file. This file is available

after you have unzipped the MegaCLI file. Detailed installation procedures can be found in the readme file

associated with each OS type.

To use the MegaCLI utility:

Download the utility from LSI at this link: MegaCLI Utility.

Install the utility on the server.

Change the path to the location where MegaCLI is installed.

Note that you must enter megacli before every command, as shown in Figure 12. The command in the figure

shows the number of adapters (controllers) installed.

Figure 12.

Using MegaCLI

Page 30 of 33