- ページ 15

スキャナー Epson Expression 636のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Epson Expression 636 36 ページ。 Product support bulletin(s)
Epson Expression 636 にも：製品情報マニュアル (5 ページ), 簡単セットアップマニュアル (21 ページ), ソフトウェアマニュアル (4 ページ), マニュアル (11 ページ), 製品サポート速報 (14 ページ), 製品サポート速報 (5 ページ)

3. Turn on the scanner by pressing the . Power button.

The scanner turns on and starts initialization. The Ready light

flashes in green until the scanner finishes initialization; it then

stops flashing and stays green. This indicates that the scanner

is ready for use.

Caution:

Whenever you turn off the scanner, wait at least 10 seconds before

turning it back on.

Connecting the Scanner to Your Computer

See the sections below to connect the scanner using the USB or

IEEE 1394 interface.

Note:

Be sure to install the scanner software before connecting the scanner

to your computer. See "Installing the Software" on page 5 for details.

Do not use the USB interface cable and an IEEE 1394 interface cable

at the same time.

Do not connect or disconnect the USB interface cable and an IEEE

1394 interface cable when the scanner is in use.

Ready light

.Power button

Setting Up the Scanner