- ページ 22

スキャナー Epson GT-9000のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Epson GT-9000 41 ページ。 Color imaging scanner

EPSON GT-9600

3.1.4 CR Motor Removal

1. Remove "Housing, Upper". (Refer to Service Manual of GT-9500)

2. Remove Bottom plate. (See "Bottom Plate Removal" on page -14)

3. Remove B077 Main Board. (See "B077 MAIN Board Removal" on

page -15)

4. Remove 5 screws(CBS, M3x6) securing "Center Rail" and "Shield

Board" from the back of scanner. Also, remove one screw(CB, 3x6)

securing "CR Motor Assembly", earth plate, and motor from the

back of scanner.

CB(3x6)

CBS(M3x6)

Figure 3-5. Screws at the Circuit Board Side Removal

Disassembly and Assembly

5. Remove carriage assembly. (Refer to Service Manual of GT-9500)

6. Remove 3 screws(CBB, 3x12) securing "Center Rail" to "Housing,

Lower", and one screw (CBS, M3x6) securing "Center Rail" to "CR

Motor Frame".

7. Remove 2 screws(CBS, M3x6) securing "Earth Plate, Front" and

"Frame, Front", and remove "Center Rail".

Housing, Lower

Center Rail

Disassembly and Assembly

CBS(M3x6)

CBB(3x12)

Figure 3-6. Center Rail Removal

Revision A

Earth

Plate,

Front

Frame,

Front