- ページ 9

ゲートウェイ Cisco ATA 188のPDF 概要マニュアルをオンラインで閲覧またはダウンロードできます。Cisco ATA 188 11 ページ。 Analog telephone adaptor
Cisco ATA 188 にも：構成 (28 ページ), 概要 (11 ページ), インストール方法 (6 ページ)

ページを印刷する

Chapter 1

Cisco Analog Telephone Adaptor Overview

Installation and Configuration Overview

Table 1-3

in a typical Cisco CallManager environment.

Table 1-3

Overview of the Steps Required to Install and Configure the Cisco ATA and Make it Operational

Action

Plan the network and Cisco ATA configuration.

Install the Ethernet connection.

Install and configure the other network devices.

Install the Cisco ATA but do not power up the Cisco ATA

yet.

If you power up the Cisco ATA before adding the

Note

Cisco ATA to the Cisco CallManager, you will need to

perform a reset once you have added the Cisco ATA to

the Cisco CallManager.

Download the desired Cisco ATA release software zip file

from the Cisco web site, then configure the Cisco ATA.

Add the Cisco ATA to the Cisco CallManager.

Power up the Cisco ATA.

Periodically, you can upgrade an individual Cisco ATA or

all Cisco ATAs to a new signaling image by using the

Cisco CallManager administration web pages.

OL-4652-01

provides the basic steps required to install and configure the Cisco ATA to make it operational

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)

Installation and Configuration Overview

Reference

What the Cisco ATA Package Includes, page 2-2

Resetting the Cisco ATA Using Cisco CallManager, page

3-26

Chapter 3, "Configuring the Cisco ATA for SCCP"

Chapter 4, "Adding the Cisco ATA to the

Cisco CallManager"

Chapter 7, "Upgrading the Cisco ATA Signaling Image"

1-9