- ページ 47

ゲートウェイ Cisco DPC3848VのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco DPC3848V 50 ページ。 Wi-fi home gateway
Cisco DPC3848V にも: クイック・インストール・マニュアル (2 ページ)

Cisco DPC3848V ユーザーマニュアル

Common Troubleshooting Issues

This section describes common problems and offers solutions.
I don't understand the front panel status indicators
See Operation of Front Panel Indicators (on page 21), for more detailed information
on front panel LED status indicator operation and function.
The Wireless Residential Gateway does not register an Ethernet connection
Try one of the following solutions:
Verify that your computer has an Ethernet card and that the Ethernet driver
software is properly installed. If you purchase and install an Ethernet card,
follow the installation instructions very carefully.
Verify the status of the front panel status indicator lights.
The Wireless Residential Gateway does not register an Ethernet connection after
connecting to a hub
If you are connecting multiple PCs to the residential gateway, you should first
connect the residential gateway to the uplink port of the hub using the correct
crossover cable. The LINK LED of the hub will illuminate continuously.
The Wireless Residential Gateway does not register a cable connection
The residential gateway works with a standard, 75-ohm, RF coaxial cable. If you are
using a different cable, your residential gateway will not function properly. Contact
your service provider to determine whether you are using the correct cable.
OL-30 544 -01
Common Troubleshooting Issues
31