- ページ 5

ゲートウェイ Cisco Meraki Z3CのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Meraki Z3C 10 ページ。
Cisco Meraki Z3C にも：インストレーション・マニュアル (6 ページ)

Mounting hardware

The supplied wall screws and anchors allow you to mount the gateway on a drywall surface, either vertically or

horizontally.

• For mounting on drywall, use a ¼-in drill bit, then insert the plastic and screw assemblies.

• For mounting on wood or a similar surface, use only the screws.

• Allow the heads of the screws to stick out far enough to be inserted securely into the back of the gateway.

• This equipment is only suitable for mounting at heights ≤ 2 m

• Warning: This equipment may not work when mains power fails.

All Meraki Z3C devices must have an IP address. This section describes how to configure your local area network

before you deploy it. A local management web service, running on the gateway, is accessed through a browser running

on a client PC. This web service is used for configuring and monitoring basic ISP/WAN connectivity.