Cisco Meraki Z3C 설치 매뉴얼 - 페이지 5

{카테고리_이름} Cisco Meraki Z3C에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Meraki Z3C 10 페이지.
Cisco Meraki Z3C에 대해서도 마찬가지입니다: 설치 매뉴얼 (6 페이지)

Mounting hardware

The supplied wall screws and anchors allow you to mount the gateway on a drywall surface, either vertically or

horizontally.

• For mounting on drywall, use a ¼-in drill bit, then insert the plastic and screw assemblies.

• For mounting on wood or a similar surface, use only the screws.

• Allow the heads of the screws to stick out far enough to be inserted securely into the back of the gateway.

• This equipment is only suitable for mounting at heights ≤ 2 m

• Warning: This equipment may not work when mains power fails.

All Meraki Z3C devices must have an IP address. This section describes how to configure your local area network

before you deploy it. A local management web service, running on the gateway, is accessed through a browser running

on a client PC. This web service is used for configuring and monitoring basic ISP/WAN connectivity.