Cisco Meraki Z3C 설치 매뉴얼 - 페이지 3

{카테고리_이름} Cisco Meraki Z3C에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Meraki Z3C 10 페이지.
Cisco Meraki Z3C에 대해서도 마찬가지입니다: 설치 매뉴얼 (6 페이지)

The Z3C back panel

Additional functions on the back panel are described below, from left to right.

WAN / Internet port

LAN ports

PoE+ Port (Port 5)

Power input

Reset button

USB port

This port provides connectivity to the WAN.

These 4 ports provide connectivity to computers, printers,

access points, or Ethernet switches.

A steady green LED indicates bidirectional connectivity,

and flashing green indicates traffic.

One of the LAN port provides PoE+ for connectivity to

computers, printers, access points, or Ethernet switches,

up to 15.4W of PoE power.

A steady green LED indicates bidirectional connectivity,

and flashing green indicates traffic.

Designed for use only with the unit's power supply.

Insert a paper clip if a reset is required.

• Press for 1 second to delete a downloaded

configuration and reboot.

• Press and hold for more than 10 seconds to force a

full factory reset.

USB 3.0 for 3G/4G wireless cards. Traffic status is

indicated by the USB LED.